THE MAKINGS OF A BRANCH FLUTE...
(click on pics to enlarge)
Ah, even the best laid plans...
Our Carolina weather pattern of late has been the pits for getting stuff done outdoors, including putting on flute finishes indoors, thanks to the sky-high humidities. I was hoping to do a cute little 'family tree' post on my new family of 'branch flutes', but the photography I want to do isn't going to happen any day soon, so it appears...
So I thought you might find it interesting how this new little offshoot began for me, and I pulled together some pictures to put it all into perspective. To set the stage, there have been flute makers that do nothing but make natural branch flutes, so it's nothing new...what is new for me is the 'look' and 'approach' and 'technique' as well as the sheer joy of seeing and hearing the finished product.
Going back a couple of years, a very special wooded area was 'harvested' in a very ugly manner, all due to a tiff between a local doctor and his local municipality.
I vowed to collect some of the 'trash' Cedar and Dogwood trees and incorporate them into flutes, so that they could be a part of healing music to go back out into the world in a positive way. I wasn't thinking branch flutes at the time, but I would still start at the same place regardless of what flute style I made. After the dust settled, I began to scout for good specimens...
Of course, the possibilities were almost unlimited...what was limited was a space to store selections since it would take a couple of years for 'green' wood to dry. However, this area had some 'dead standing' trees already, which is preferable to dead trees lying on the ground where they can rot more quickly over the years. I was able to use some of the dead Cedar immediately as it was already dry, and just recently began incorporating Dogwood. Now that I've started making some branch flutes, I go back to the area and still rather easily find some pretty good wannabes, which is why I carry a handsaw under Mercy's quilt in the back of the car!...
This post is about just one particular piece I began to finish up last week, a piece I could have easily argued wasn't worth looking at twice and passed over. I think it might be an old Dogwood branch, but it was so 'dead' already I couldn't tell with much confidence. It was a hardwood that was now softer inside thanks to initial drying and decay.
Today will simply be the beginning images...the finished flute (well, except for a couple of more finish coats when I can get 'em put on!) is sitting ready for pictures...and it turned out beautifully, all things considered. That last phrase is because these flutes take a LOT of handwork, especially for hole and crack filling, and then the whole unique sound 'issues' that have to be calculated and solved especially for curvy pieces like this one...
I did lightly knock off what bark was left on this dead branch so that I could get a better look at what cracks and blemishes were where; too, you have to envision which end will be the mouthpiece...which will be the foot...where the sound hole 'nest' will go...which will be the more ergonomic placement for finger holes...where the musical 'end' of the flute will be so you can drop in a tuning hole(s) to keep more of the stick for aesthetics...
Since this is all still new to me and a constant work in progress, I will be shying away from flutes with noticeable cracks, unless they are solitary ones. The process is that I cut the branch in half with a band saw, cut out the insides with various tools to specifications I draw up for a particular branch, then glue it back together. With large cracks, they are rarely straight up and down and in one plane; rather, they usually exist in groups on multiple planes, and when you make a cut with a band saw, which is one plane, or even in the hollowing stage, you risk cracked pieces flying off as you cut into the flute, many times making the wood firewood!
Here is what I came up with for this particular piece:
I'm obviously leaving a lot out about, say, how I know I need a tuning hole in that particular location, etc. That's a function of the approximate diameter of the bore I'm cutting out versus length of barrel I cut out...which has as the starting point at the 'nest' area and the TSH (true sound hole, in front of the block)...if you think there is a lot of blind trust and faith in this process, you are correct! But that's the beauty of being an artist and making unique creations: there ain't no guide book. You go within and listen to your intuition and follow your inspiration.
Last week I was adding the four new branch flutes to the 'family tree' (below), and today's 'kid' is the one closest to the anaconda-size 'trunk' flute at the bottom. I had not yet split it, only cut the mouthpiece area (which is on the right end) and sanded the rough areas off the flute
It just so happens I tuned all of these to Verdi frequencies..today's is a high B...the top one pictured is a high C#....followed by a lovely straight, bright mid G...and then the bottom Bahama Mama is a bass A# that would astound you by how very little breath it takes to play and still get a rich, full tone.
Not to tease you, but I'm not taking just any ol' snapshot of the finished product just to include it in this post...this was more to give you an idea of what processes I work through. I tap the 'nest' sound holes just like a regular flute, 'guess' at the tuning hole and tweak until I get a solid fundamental note, just like a regular flute. I then measure and drop the finger holes where they need to go, though it is a bit trickier with a curvy piece with uneven wall thicknesses...still, pretty close to how I do a regular flute. The difference is that when you get it all done and then add all the finishing work, I have something rather extraordinary when I compare to the old stick I found lying on the ground. This particular piece has some gorgeous coloration and patterning in it that I'll get close-ups of...it's worth the wait, I promise!
Well, when the weather cooperates, the pics will come forth...I will be unable to do a video insert for a few days due to a few temporary technical issues, but I think you'd like to hear and see them being played. As I always say, "Stay tuned!"
(click on pics to enlarge)
Ah, even the best laid plans...
Our Carolina weather pattern of late has been the pits for getting stuff done outdoors, including putting on flute finishes indoors, thanks to the sky-high humidities. I was hoping to do a cute little 'family tree' post on my new family of 'branch flutes', but the photography I want to do isn't going to happen any day soon, so it appears...
So I thought you might find it interesting how this new little offshoot began for me, and I pulled together some pictures to put it all into perspective. To set the stage, there have been flute makers that do nothing but make natural branch flutes, so it's nothing new...what is new for me is the 'look' and 'approach' and 'technique' as well as the sheer joy of seeing and hearing the finished product.
Going back a couple of years, a very special wooded area was 'harvested' in a very ugly manner, all due to a tiff between a local doctor and his local municipality.
I vowed to collect some of the 'trash' Cedar and Dogwood trees and incorporate them into flutes, so that they could be a part of healing music to go back out into the world in a positive way. I wasn't thinking branch flutes at the time, but I would still start at the same place regardless of what flute style I made. After the dust settled, I began to scout for good specimens...
Of course, the possibilities were almost unlimited...what was limited was a space to store selections since it would take a couple of years for 'green' wood to dry. However, this area had some 'dead standing' trees already, which is preferable to dead trees lying on the ground where they can rot more quickly over the years. I was able to use some of the dead Cedar immediately as it was already dry, and just recently began incorporating Dogwood. Now that I've started making some branch flutes, I go back to the area and still rather easily find some pretty good wannabes, which is why I carry a handsaw under Mercy's quilt in the back of the car!...
This post is about just one particular piece I began to finish up last week, a piece I could have easily argued wasn't worth looking at twice and passed over. I think it might be an old Dogwood branch, but it was so 'dead' already I couldn't tell with much confidence. It was a hardwood that was now softer inside thanks to initial drying and decay.Today will simply be the beginning images...the finished flute (well, except for a couple of more finish coats when I can get 'em put on!) is sitting ready for pictures...and it turned out beautifully, all things considered. That last phrase is because these flutes take a LOT of handwork, especially for hole and crack filling, and then the whole unique sound 'issues' that have to be calculated and solved especially for curvy pieces like this one...
I did lightly knock off what bark was left on this dead branch so that I could get a better look at what cracks and blemishes were where; too, you have to envision which end will be the mouthpiece...which will be the foot...where the sound hole 'nest' will go...which will be the more ergonomic placement for finger holes...where the musical 'end' of the flute will be so you can drop in a tuning hole(s) to keep more of the stick for aesthetics...
Since this is all still new to me and a constant work in progress, I will be shying away from flutes with noticeable cracks, unless they are solitary ones. The process is that I cut the branch in half with a band saw, cut out the insides with various tools to specifications I draw up for a particular branch, then glue it back together. With large cracks, they are rarely straight up and down and in one plane; rather, they usually exist in groups on multiple planes, and when you make a cut with a band saw, which is one plane, or even in the hollowing stage, you risk cracked pieces flying off as you cut into the flute, many times making the wood firewood!Here is what I came up with for this particular piece:
I'm obviously leaving a lot out about, say, how I know I need a tuning hole in that particular location, etc. That's a function of the approximate diameter of the bore I'm cutting out versus length of barrel I cut out...which has as the starting point at the 'nest' area and the TSH (true sound hole, in front of the block)...if you think there is a lot of blind trust and faith in this process, you are correct! But that's the beauty of being an artist and making unique creations: there ain't no guide book. You go within and listen to your intuition and follow your inspiration.Last week I was adding the four new branch flutes to the 'family tree' (below), and today's 'kid' is the one closest to the anaconda-size 'trunk' flute at the bottom. I had not yet split it, only cut the mouthpiece area (which is on the right end) and sanded the rough areas off the flute
It just so happens I tuned all of these to Verdi frequencies..today's is a high B...the top one pictured is a high C#....followed by a lovely straight, bright mid G...and then the bottom Bahama Mama is a bass A# that would astound you by how very little breath it takes to play and still get a rich, full tone.Not to tease you, but I'm not taking just any ol' snapshot of the finished product just to include it in this post...this was more to give you an idea of what processes I work through. I tap the 'nest' sound holes just like a regular flute, 'guess' at the tuning hole and tweak until I get a solid fundamental note, just like a regular flute. I then measure and drop the finger holes where they need to go, though it is a bit trickier with a curvy piece with uneven wall thicknesses...still, pretty close to how I do a regular flute. The difference is that when you get it all done and then add all the finishing work, I have something rather extraordinary when I compare to the old stick I found lying on the ground. This particular piece has some gorgeous coloration and patterning in it that I'll get close-ups of...it's worth the wait, I promise!
Well, when the weather cooperates, the pics will come forth...I will be unable to do a video insert for a few days due to a few temporary technical issues, but I think you'd like to hear and see them being played. As I always say, "Stay tuned!"
No comments:
Post a Comment